WELCOME TO THE XFIRE PERFORMANCE COMPANY BLOG

This will be a place to find out about NEW and old items and projects that are/may be either coming up or available now. This is NOT intended to be a daily Blog unless I need to get something out to you fast that I think is important to customers, so no need to check it on a daily basis, but feel free to do so if you like. I do not have a lot of time to just write about things in general concerning crossfire injection, so don’t look for that sort of thing here. The FAQ has a lot of those type of answers you may be looking for. NOTE: A new restocking fee of 15% is now in-force on returned items to include the EBL ECM starting January 5, 2022 and moving forward, see below.

Nov 15, 2024

Added more blue 82 fuel pressure assemblies today..Get them while you can.

Nov 12, 2024

Added the EBL ECM back into the Shop even though it is not available right now. If you would like to be notified when they are available again, sign up at the bottom of that EBL page with your email. Thank you all.

Nov 7, 2024

I have removed the EBL ECM from the Shop. I was going to the East coast to try and work out a deal with them, but the owners wife does not take calls, here mailbox is full and will not answer a text. Since I can not get a hold of them, I’m not going to try and do anything with them and the EBL. I will leave everyone in the notification que just in case something happens. Sorry to all, but this is not my fault on this issue…I tried.

Nov 2, 2024

Added more 82 Black fuel pressure assemblies. If anyone was wanting or waiting for one of these assemblies, they are available once again.

Oct 28, 2024

All the orders for the black FPAs have sold out and all orders went out this morning, there were a lot. It appears that there was more people wanting one than units available, which isn’t unusual. Not a problem, and more parts where ordered this weekend for the black units. If you wanted a black FPA and didn’t get one, just put your email back in on the notification on the that page and you will be notified when available again in stock. Just a hint, they were completely sold out in 24hrs.

Oct 26, 2024

Added Black 82 FPAs today. Good Luck. If you do not get one, sign up again for notification. Thank you.

Oct 25, 2024

Still waiting for a few more parts that are delayed to get the 82 FPAs done and out. My business trip has been slipped back a few days so far, so I now have time to try and get the 82 FPAs done and out or at least as much as possible. If you do not get one after being notified that they are in stock, please resubmit your email for notification. All that means is you were not fast enough to get one that time around. I’m trying to accommodate everyone, but there are a lot of people wanting one right now. Thank you and good luck.

Oct 21, 2024

Well, all the parts needed to get the FPAs going did not show up liked expected and should be here tomorrow. However, that may be a little too late since I’m supposed to go out of town for the EBL crisis to see what I can do. I won’t be here to ship anything out and my wife does not know how to take of all this while I’m gone. I will have a laptop with me to do some updates, but that is the best I can do right now. Sorry for the inconvenience everyone. Like I said earlier, it’s been a crazy year. Hopefully everything goes well…

Oct 17, 2024

NEW! I reopened the throttle body boring services for 2” boring ONLY. Please have a look in the Shop. Also, it looks like most of my parts will arrived today and there is a possibility that I may have “some” 82 fuel pressure assemblies available either tomorrow or this weekend. Please have a look. One more thing about this subject. As the inventory gets stocked and the notifications get sent out, if they sell out before you can order one, please resubmit your email at the bottom of that page for the assembly so that you will get automatically notified again when stocked. TIP: They do go quickly and it is first come, first serve until out of stock again.

I’m still working on the EBL ECM issue with supply. Hoping my business trip clears that up, stand-by for more information on that topic. Thank you to all for your patience, it’s been a rough year.

Oct 15, 2024

It looks like I may receive some parts in this week for some of the fuel pressure assemblies, watch the Blog and Shop for more on this subject and availability. Also, picked up more fuel blank off plates, but they still need to be laser etched. These will hopefully go back into stock soon.

Oct 14, 2024

Had to order more parts for the fuel pressure assemblies and should be here in a week or so. I should have some black FPAs available then for the 82 corvette. Also should have some blue fitting 82 corvette FPAs about the same time frame, maybe sooner on those. I will be on a business trip after the 21st of this month for a week or so to try and sort out the EBL issue, we shall see how that goes and post up here any news on that. Meantime, the list of people that want an EBL is growing. Thank you to all that have signed up for that item and hopefully soon, I will have good news on that. Everyone have a great week!

Oct 8, 2024

Added more TB spacers into stock. Also, added a set of 2” throttle bodies for sale. They are completely rebuilt and ready to go.

Oct 3, 2024

More TPS sensor test harnesses added today. Also, I should have more fuel blank off plates in a week or so along with more 82 fuel pressure assemblies. The 84 fuel pressure assemblies will come a little farther out. Thank you and my surgery is healing pretty good and at least the pain is gone for the most part and I can get back to work on things.

Oct 2, 2024

Attention to all! If the items you are looking at/for are “SOLD OUT” in the Shop, please go to the bottom of that page and enter your email address to be notified when the item is available again. No, I don’t blast out spam mail to your email after that. Thank you and good luck.

Sep 28, 2024

I have removed all the throttle body services from the Shop. This may be temporary or permanent. Having issues with the machinist at the moment and until that is cleared up, the services have been halted. Thank you.

Sep 24, 2024

HOT! Still working on a way to solve the EBL issue since Bob at Dynamic EFI has passed away. Working on that for sure and I “may” know more on that next week? With his passing, this has created a huge issue with the CFI along with the TPI community worldwide. One way or another, we will get through this, but it may take a little time, we shall see. Thank you all for your patience.

Sep 23, 2024

NEWS FLASH! It is official, the owner of Dynamic EFI has passed away recently. I spoke with his wife today to give my condolences. He will be missed in the community. I just thought everyone in the CFI world should know this.

Sep 20, 2024

NEWS FLASH! It appears that maybe Bob Rauscher, founder of Dynamic EFI and creator of the EBL Flash II ECM has passed away recently and suddenly. I’m trying to confirm this now and will post here with more information if I can. This is a HUGE in the CFI community.

Sep 18, 2024

Well, XFire Performance has got into print with the NCRS and has a four page article about us written by a company that I helped with an 82 corvette and a bad ECM with some other issues. Four page article and is in the The Corvette Restorer magazine, Fall 2024/Volume 51/Number 2, starting on page nice. The Ray at “Ray's Rods & Restorations LLC” in Jackson Township, NJ for taking the time to write the article. If you are in that area and have issues with your corvette, Ray IS the guy to see about the repair, including painting…Tell him Tom sent you.

Sep 7, 2024

Throttle Body Update: The throttle body services has been reopened if you are interested in that type of service. Anyone that signed up for notification of these services should have received an email as well. Also, I hope to have some news on the ECM dilemma next week. Thank you for your patience.

Sep 2, 2024

No word on ECMs yet. I.m hoping to hear back this week, but it may not happen depending on a few things with the company. I will post here when I have more news on the subject.

Aug 23, 2024

UPDATE: Had my meeting with software and hardware engineers and that all went pretty well, but may be another two weeks before I hear from them. It’s actually a good timing since I had shoulder rotator reconstruction done yesterday and will be somewhat out it for a little while. If you had this type of surgery, you know what I mean. We shall see.

Aug 21, 2024

EBL UPDATE: I have a meeting today with a company concerning the EBL and will post more as I have it. In the meantime, Dynamic EFI is still MIA with the no reply emails, but I have found out that I’m not the only one that isn’t getting a response from them. I have no idea what’s going on over there at Dynamic EFI, but maybe the owner has taken sick or is on a very long vacation, no clue. Also, if you want an ECM, just sign-up on the EBL ECM page at the bottom for notification when they are available. Thank you all for your patience.

Aug 9, 2024

Important Notice for the EBL stock tune for 82/84 corvettes. A Word and Bit issue was discovered with the stock tune. It has to do with the EGR operation/control. If you are using a functional EGR and you still have a slight rough idle, the setting for that may be wrong in the tune. This was just discovered. Keep in mind, if your engine is running just fine at idle, you do not have to change anything, just if you still have a slightly rough idle. If this update does not change your idle condition, you can either leave it updated or change it back, your option. You can change this yourself using TunerPro RT. To do this, do the following.

1. Open TunerPro RT and look at the Flag/Switches Table.

2. Scroll down to Option Word 4 Bit 7 EGR.

3. If the Set box is NOT checked, check it and then click Save.

4. Scroll to Option Word 4 Bit 6 EgrNC.

5. If the Set box is checked, Uncheck it and click Save.

6. Upload your updated tune BIN file using What’s Up Display and your done.

You can also after checking this and need to make the change update, you can email me and I can send you the updated tune BIN file via email and you can upload the tune BIN file using What’s Up Display. TunerPro RT is FREE and both work the same, but they would like you to donate, if you can. You can download TunerPro here. TunerPro RT

Also, no word from Dynamic EFI yet on the EBLs.

Aug 7, 2024

Everything seems to be good with the EBL. Just waiting to hear back from Dynamic EFI, more as it develops.

Aug 5, 2024

EBL UPDATE: GREAT NEWS! The mounting of the HAM interface went well and the company agreed to the HAM installations. Hoping to send off units to have EBL installed soon, maybe this week if possible. Keep looking for more updates on the EBL ECMs.

BTW, there are a lot of people wanting the EBL, more than I can get done in the first batch. I’m hoping to get at least 10 completed and then have to start another batch right away. If you do not get an EBL when available, please sign up again for notification when in stock again and I should be able to take care of you in the next batch. Sorry about the delay, but I’m at everyone elese schedule, not mine.

Aug 2, 2024

EBL UPDATE: It’s looking pretty good for the HAM install and I should have the final word on Monday. I have a meeting with the company owner next week to get things going. Thank you for having some patience on this subject.

July 30, 2024

EBL UPDATE: Went over to the company doing the interface board installation and dropped off a few more boards so that they can give me a firm quote on cost long term. I should know something by this Friday or sooner with any luck. I will keep you all posted. Thank you.

July 29, 2024

EBL UPDATE: I thought I would have good news last Monday, but that didn’t happen. I did get somewhat good news on Friday, but hope to hear better news this week with any luck. Once this good news happens, I can get back to business as usual with the EBL ECMs. Keep watching here for more information on this subject.

ANOTHER EBL UPDATE TODAY: Received some good news later in the day today. It looks like the company is having success with the interface. I hope to have great news maybe by the end of the week. Fingers crossed.

July 23, 2024

EBL UPDATE: I have temporarily removed the throttle body services from the Shop. Our machinist was hospitalized and now there is a backlog, but hopefully they will all go out soon. Sorry for any delays and appreciate your patience, but it was unforeseen.

July 22, 2024

Hoping to have some good news today on the EBL issue, we shall see.

July 11, 2024

NOTICE: If you need or want an EBL ECM, please go to the EBL page via the following link and sign up for a notification by using your email address signup at the bottom of the page. I’m hoping to get this project going again and should find out somewhat soon. https://www.xfireperformance.com/shop/eblflash2ecm Thank you all for your support.

July 10, 2024

Had a meeting with some engineers today on the ECM issue and they are going to work on a fix, parts ordered and I will know more in two weeks. Stay tuned for more information on this issue. Hopefully I will have some good news as the list for the EBL notification grows. I have at least 25 units ready for upgrade.

July 7, 2024

It appears that the USPS has raised their prices on commercial shipping once again. I’m NOT going to raise my shipping charges at this point, but could change down the road if needed. It is ridiculous how high in price things have gotten in this country and I hate to just pass on the costs just because. Thank you for your support.

Also, I have been working on a solution for the EBL issue. I had a business meeting with a company and it sounded promising. I have to met with them again next week Wed and see how things worked out on their end. Please stop by for more info on this subject.

July 2, 2024

As I have mentioned, I’m actively trying to solve the ECM issue and had a meeting with a local company today. One way or another, I will get this fixed somehow. Keep stopping by for news as it happens. Thank you all for your support. There are a lot of people already signed up for ECM notifications.

June 25, 2024

As some of you may know, there is an issue concerning our HAM board interface and the EBL on discontinued installation by Dynamic EFI. It has NOTHING to do with the HAM board being bad or defective in any way. Yesterday, I sold out of ALL EBL ECMs within 50 minutes of the last batch going online. That in itself is crazy, but is a testament on how well, and compatible these units are for CFI. They are an extremely critical part needed if you want to mod your CFI car or your stock GM ECM is dead. Also, if you modded your CF engine or would want to add the Renegade manifold at some point during your build. I’m actively pursuing a solution to the HAM/EBL dilemma. I think I may be close to having them again, but we shall see. Keep coming back for more information on this subject and more…

Also, sorry to all that wasn’t able to get an EBL yesterday. I researched my site back-end and found that my site sent out all the notifications at once to anyone that subscribed to the EBL out of stock. However, there were many more people wanting on EBL than I had coming in to stock by far, which I did not plan for and couldn't do any thing about anyway. My apology on that. With any luck the dilemma will be solved on the EBL soon, and the CFI community can once again purchase a great product that is 100% plug-N-play unit and laptop tunable. Thank you for your continued support.

June 24, 2024

The EBLs are completely SOLD OUT! Less than one hour after they went online…WOW! However, I knew they would go quick. I do not know if I will ever have any again, we shall see. Sorry if you wanted one and didn’t get one. Keep watching the Blog and see. Thank you.

June 21, 2024

The last batch of EBLs will be arriving next week. Good luck to all that need one.

June 12, 2024

Added a NEW item today. It is the same 82 fuel pressure assembly, only with black fittings for those of you that want black vs. blue. The price has gone up on the black assembly because the black fittings cost more for some odd reason. Hoping to have some 82 blue as well soon. Enjoy!

June 5, 2024

UPDATE: There has been a price increase on the EBL since Dynamic EFI has increased their price to me on this last batch. I have no choice but to pass that increase on the customer, though reluctantly. Sorry about this and good luck on your purchase of the EBL later this month.

May 24, 2024

I have some bad news to you all. The manufacturer of the EBL, Dynamic EFI has notified me that they are refusing to install my interface board (HAM) in EBLs for CFI. They are saying it is too labor intensive and I’m ordering too many, they have only been doing it for three plus years, now it’s an issue. The reason I have been ordering more, is that the stock CFI ECMs are going out after 42+ years and I can’t keep EBLs in stock for very long. I have a couple left now and I’m going to be getting a few more, but that will be weeks from now. If you want or need an ECM/EBL, now would be the time to get one before they are no longer available. This is a HUGE blow for me and the CFI community and will also have a HUGE impact on the Renegade project and may kill that as well, another blow for CFI. Sorry to have to bring this bit of bad news. More as this developes…

May 22, 2024

EBLs have been added into stock today. Good luck.

May 21, 2024

I have a feeling that the EBLs coming tomorrow will not be enough to support everyone that is waiting for one. If this happens again, please put your email address at the bottom of the page to be notified again. Thank you and good luck.

May 20, 2024

Tracking number today says that the EBLs “should” be here Wed sometime. I will add them to stock when they arrive. Good luck to all that may want one for this go-around.

May 18, 2024

Just received mail from the manufacturer of the EBL and I thought that I may get the next batch of EBLs Monday or Tuesday this coming week, but it now looks like Thursday or Friday. Just letting you all know how the shipments are going on things that I’m waiting to arrive. Another order of EBLs has already been submitted since I expect to sell out on this batch coming.

Also, added more fuel pressure tools added to stock.

May 17, 2024

Going to try and have some tools and 82 fuel pressure assemblies this weekend. Keep stopping by. Thank you.

May 16, 2024

It looks like the next batch of EBLs will be here early next week. If you want one, sign up on the notification sheet at the bottom of the EBL page. Thank you.

May 10, 2024

The 82 FPAs are SOLD OUT once again right after a put some in stock. More will come a little later since I must order more supplies now. The fuel pressure tools will be available soon again also. I will be getting all the parts tomorrow. So keep watching for that item and like always, if something is sold out, put your email address on that item in the notification box and you will get notified when available.

May 7, 2024

ALL EBL ECMs are SOLD OUT! Another incredible sales event in record time. Thank you to all the supporters and more EBLs will be coming soon if you are still needing one. If so, please sign up on the EBL page at the bottom with your email to be notified when available in stock.

May 6, 2024

The other batch of EBLs have arrived, good luck to all that wanted an EBL ECM. More are coming as well.

Also for orders outside the USA, your order will NOT go through. The site is NOT setup to purchase ANY order outside of the US, to include Canada. If you want something that is in stock and outside the US, you MUST contact me first via out Contact page and let me know what you want and I WILL invoice you via PayPal. **NOTE: There are some countries I will NOT send to no matter what. If you are in one of these countries, sorry, but other dishonest people have ruined it for you. There is a list of countries we will NOT ship to in this Blog.

May 3, 2024

Received an email today that the batch of EBLs should arrive here Monday, 5/6/24. I will post when they get here. Again, if there is anyone who does not get an EBL after this batch that needs one, I still have another batch coming after this batch on Monday. Not sure when they will arrive, but my guess would be in the week of 13 May. but it could be sooner. Thank you all for the support.

May 2, 2024

More good news and bad. I just received an email from the supplier of EBLs to me. The good news is the other batch of EBLs will ship tomorrow and maybe get them Monday or Tuesday. The bad news is they informed me of a price increase on the EBL after this batch coming. I’m seeing what can be done on this, but it’s looks inevitable. Everyone is raising there prices on everything these days and not exactly sure why, maybe it’s that great Biden Economics that isn’t working, but won’t tell the truth to the country. Sorry if this impacts some more than others, but it can’t be helped right now. Again, thank you for your support to me and the CFI world. Save the wave!

May 1, 2024

GOOD NEWS! The first batch of EBL ECMs arrived today and are in stock now. If I sell out and you were on the notification list, PLEASE sign up again and you will be notified when the next batch comes arrives which may be this weekend or first of next week. Thank you and good luck.

UPDATE! ALL the EBLs SOLD OUT in exactly 40 minutes. That has to be some kind of record. I have lots of packaging to do today and will get as many as possible out today as I can. Moving forward, if you still need an EBL and didn’t get one, PLEASE sign up with your email again and you will be notified when the next batch arrives. I guess there were a lot of people looking for an EBL that I thought. I already sent another order for more today. That new order will probably take two weeks(ish) to arrive. Thank you all and hope everyone gets an EBL at some point.

ANOTHER UPDATE! All the EBLs that were purchased have gone out today except three. Those three will go out tomorrow morning. Thank you all for your support and if you missed out today, signup again for the next batch arriving soon.

April 27, 2024

Hello all. Just a kind reminder. If you purchase something from us, please leave a review of that item for others. The review email will arrive approximately 14 days after the item(s) ship. I would sincerely appreciate the review and I’m sure others would as well if they are wondering about a certain product or service. I wish I could respond to these reviews, but the software won’t let me. Thank you and have a great rest of your weekend.

April 26, 2024

I just received an email about the tentative arrival time of the next batch of EBLs. It looks like it won’t be until next week, Wed/Thur? The shipment may also be broken up into two separate shipments as well. If this happens, everyone that has requested an automatic notification will get notified that they are back in stock, but may not be able to purchase one since there are more people waiting than may come in with the first shipment.

So, if you get notified and are not able to get an EBL, please re-signup for auto notification and you should be able to get one on the next batch which may be a few more days after Wed/Thur. Sorry, but I ordered a lot and put a bit of a strain on the manufacturer and they are scrambling. Hopefully I will not run out too quickly. Thank you all and good luck. Have a great weekend.

April 25, 2024

Once again the 84 fuel pressure assemblies have sold out in record time. Not sure when I will have more in stock. Keep signing up on site page for the assemblies to be notified when available. Hope to have word on the EBL arrivals soon. Thank you all.

April 21, 2024

Added more 84 fuel pressure assemblies to stock today.

April 18, 2024

Sorry to all the 84 owners that have been waiting for the 84 fuel pressure assemblies and did not get one. I guess there were more people waiting for these than the amount that went into stock the other day, they do go quickly. If you are still waiting for one, please sign up again on the 84 fuel pressure assembly page with your email. It will send out a message that they are in stock again, you must act quickly though. Going to the machinists tomorrow to see if any of the tools parts are done. I will post up here when they are available again.

April 15, 2024

84 fuel pressure assemblies sold out in 24 hours. Parts for fuel pressure tools are being machined and hopefully will be done in a week? EBLs sold out and more coming in the next couple weeks. Watch for up[dates on all that here. Don’t forget to follow us on Instagram. Thank you for your support.

April 15, 2024

Added more 82 and 84 fuel pressure assemblies to stock. Enjoy!

April 11, 2024

I have partnered with a new company named Active Solutions Machining in Chandler Arizona to tackle the Renegade manifold machining project. There is still a lot to do on this project to include another 3D scan of the raw manifold casting for the machine shop. I just thought I’d update you all on this subject. Have a great weekend.

April 4, 2024

Made some changes to the wording on the EBL page for the 84 corvette mounting. If you are an 84 owner looking for an EBL, please read the NOTE towards the bottom of that page. I may also add more things to this post today about other items going back into stock. I’ve been as busy as I can be while in my medical recovery. Thank you for your patience.

March 4, 2024

Hello all, I’m out of the hospital and on the mend. I’m about 85% good to go and will probably take another week or two to get back to normal again. With that said, don’t forget to FOLLOW us on Instagram. You can find the link at the bottom of each page. I will be posting movement about the Renegade manifold project and the on here about that process. Stay tuned for more info…

Also, made some page changes, nothing huge, just a better explanation of some things. Enjoy and have a great week all.

February 22, 2024

Hello everyone. If you are thinking about ordering anything, could you please refrain from doing that until maybe later this weekend. I’ve been in the hospital since the 19th and still here today. With any luck I will be able to leave today. Thank you and have a great day..

February 13, 2024

EBLs have been going rather quickly lately. If you are wanting one or thinking about one, now would be the time to purchase an EBL. Great product hands down.

February 7, 2024

NEW ITEM - XFire Performance black T-shirts NOW available.

February 6, 2024

It looks like the T-shirts may be available by this Thursday. Remember to FOLLOW us on Instagram. Link is at the bottom of each page or look-up Xfire Performance. Also, made some minor text additions to the site.

February 3, 2024

Added a NEW item in the Shop. We will soon have XFire Performance T-shirts in stock. You can go to the Shop and see what they will look like, both front and back now. No, these are not made in China and I’m only doing one color for now, black in M, L, XL and 2XL. These are really nice quality shirts and I have been testing them for a number of months to see what the quality is like and I like them. They are a Super Heavy, 100% cotton shirt versus a flimsy shirt that I really don’t like especially when someone charges a lot of money for them. These shirts are definitely worth the money in that respect. I do not have a price yet, but hope to have some in stock in the next week or so. I will post here when they are available. Thank you for your support.

January 29, 2024

Been somewhat busy with Instagram and made a short vid today, check it out. FOLLOW us on Instagram. Also, I will be dropping off some core boxes off at the foundry for the Renegade manifold so that they can make some up and be ready to pour some test pour manifolds in late February or early March. Hope to get back into the manifold business again, but it still is a ways out, lots of testing to do and machining items to focus on as well.

January 22, 2024

OK, after thinking about it, I decided NOT to increase my shipping charges at this time…Operations as normal. Also, as of today, we are on Instagram. The links are at the bottom of all the pages. If you like us, please FOLLOW us. Who knows, maybe a video or two may pop up, you never know. Thank you all for your dedication to CFI.

January 21, 2024

The USPS shipping rates have gone up again. I have no choice and will have to raise mine as well soon even though I don’t want to do that. Just a heads up.

January 18, 2024

Added 84 fuel pressure assemblies today along with fuel pressure adjusting tools. More EBLs will be added tomorrow. Enjoy!

January 17, 2024

More EBL ECMs are on the way and should be here this Friday. I should have plenty of EBLs to last a little while this time, but we shall see. Have a great week all.

January 16, 2024

Another batch of EBL ECMs are on the way and I should have them either this Thursday or Friday depending on how shipping goes.

January 12, 2024

More EBLs added to stock today and more on the way. If you have been waiting for or need a new ECM, this would be a good time to get one. Also, made some changes/update to PayPal so that the correct company email shows up to customers when purchasing items… tom@xfireperformance.com

January 6, 2024

Wow! All the 84 fuel pressure assemblies are gone. I knew they would go quickly, but they only lasted one day. I have parts on order for more assemblies, both 82 and 84. I should have more assemblies available in a week or two.

January 5, 2024

84 fuel pressure assemblies added today. They won’t last long. Also added more TPS test harnesses.

January 3, 2024

UPDATE: Contacted the foundry today. I was hoping to get some test pours done this month, but it really looks like it won’t happen until February. I’m trying to get a more accurate time frame on the pours. The foundry is slammed right now. I’ll be taking all the core boxes over to the foundry so that they can have some made up and be ready at least. More on this as it develops. At least we are “finally”, moving in the right direction with the project.

January 2, 2024

UPDATE: Renegade project is starting to move forward. I contacted the foundry today to schedule some test pours to be done. I will post more information as it develops. Hope everyone had a great and safe New Years.

December 31, 2023

As this year draws to a close, I find myself reflecting on 2023 with massive gratitude to you, my customers, for my success. This year, we’ve achieved some significant milestones in my company’s short existence. It is because of your loyalty and support, that I have accomplished what nobody else has done and only dreamed of doing in just a few short years. You have journeyed with me through the launch of the widely successful EBL line of ECMs, the throttle body rebuild/boring and it looks like with your continued support, the relaunch of the Renegade manifold in 2024. I going to try and scheduling test pours at the foundry next week and hopefully get some poured within a couple weeks for the machinist I plan on working with. We shall see how this new project pans out.

If all goes as planned, the reintroduction of the Renegade manifold will once again become revolutionary in the crossfire injection world. 2024 could become a GREAT year. Again, thank you all for your support and have a Happy and safe New Year..

December 29, 2023

84 fuel pressure assemblies added today. I also have more EBLs in stock and more coming soon. Happy New Year.

UPDATE: I was up late doing book-work and noticed a lot of orders coming in. The 84 fuel pressure assemblies are SOLD OUT already. Sorry, they do go quickly. Hope to have more maybe next year.

December 24, 2023

More parts arrived yesterday for the 82/84 fuel pressure assemblies. I will try to have more available next week.

December 23, 2023

More EBLs arrived today, earlier than I expected. They are now in stock, but I expect them to go quickly.

December 22, 2023

EBL SOLD OUT again. Thank you and more are on the way. Unfortunately, they won’t be here until later next week depending on shipping delays. Everyone have a MERRY CHRISTMAS. Also, made a minor tweak on 82/84 diagrams page.

December 21, 2023

I just put an EBL in stock today for anyone wanting one. Good luck.

December 19, 2023

The EBLs are SOLD OUT again and they went VERY quickly. My advise to anyone looking for or wanting an EBL ECM, when you see it available, get it. I was contacted by the manufacturer this morning and more will go out next week. No idea on shipping time frame now with the Christmas holiday upon us. Thank you all for your business and enjoy your EBL ECM, it works just fine as long as the rest of your car is in good working order. MERRY CHRISTMAS and HAPPY NEW YEAR to all.

Also, added another FAQ and minor adjustments throughout the site.

December 18, 2023

Only a few more EBLs came in today, but more have been sent. Christmas holiday is playing into the long delay on shipments. Sorry for the inconvenience. Also, I had a meeting with a local machine shop about the Renegade manifold. Don’t know how this will go, but it does look a bit promising according to them. More to come…

December 12, 2023

All of the EBLs are SOLD OUT that just arrived on Saturday. I have a new batch arriving this Thursday if you still need an ECM and missed out. As always, get an EBL while you can.

December 9, 2023

EBLs have arrived and in stock as of today. If you have been waiting for an EBL ECM, now would be a good time to pick one up.

December 7, 2023

Good news! It looks like I should have more EBLs arrive this Saturday according to USPS. Keep watching the site for their arrival.

December 5, 2023

Notified today that one shipment of EBLs will go out this Thursday. This means I should get them next Monday - Wednesday. Keep watching the Shop and the Blog for more information on the EBLs. Thank you.

December 4, 2023

I was just notified that the new shipment of EBLs will not be here this week as I hoped and won’t ship until this Friday., but will be next week. So that will put them here around next Wednesday or Thursday. I will post up here when they arrive and make them available as some as possible. Sorry to all that have been waiting for these, but the holiday kind of messed things up a bit for production. I have a lot coming in in preparation for the up coming holiday, so Merry Christmas.

November 17, 2023

Minor site changes made today. Still looking until after Thanksgiving on the EBLs arrivals.

November 15, 2023

We have once again sold out of the popular EBL ECMs. They do not last long and if you need one or want a spare ECM, get one when they are back in stock while you can. I will have more coming, but unfortunately, they will not be here until after Thanksgiving. Check back with us after the holiday. Have a GREAT THANKSGIVING DAY!

November 13, 2023

Added a NEW item in the Shop. A CFI TBI gasket set has been added. You never know when you may need just some gaskets if you take the throttle bodies apart and a gasket gets torn.

November 8, 2023

Added a few 84 fuel pressure assemblies today, I’m sure they will not last long. Good luck.

November 6, 2023

Added two new items to the Shop tonight. A Service #3 and #4 for throttle bodies. These are a bore service and complete rebuild service, not cheap, but we do it right. There nobody that we know of doing throttle bodies like we do and the level of detail that we are doing these units. I will be adding throttle body rebuild gasket sets soon as well. Watch for those coming soon.

November 5, 2023

RENEGADE MANIFOLD UPDATE: So, I have a foundry lined up to do some test pours, but needed a machinist to do all the machining involved. I think I may have found one and he has seen the manifold and liked what he saw and didn’t have an issue with anything. Now it’s a matter of cost/quote on his end and then I can schedule the foundry on the test pours. Keeping my fingers crossed that everything goes well and we can once again start production with the Renegade manifold again after years of being out of production. Keep stopping by for more information on the manifold project and hopefully they will become available again soon. Don’t forget to sign up on the Renegade page for the waiting list if you haven’t already done that. It’s at the bottom of this page. Renegade waiting list click on the Renegade.

November 3, 2023

It’s been a while, but I added more fuel pressure adjustment tools to stock. Since there is a backlog of people wanting one, no telling how long they will last. If you were waiting for one of these tools, get it while you can. Sorry for the wait.

Renegade Update: I have 35 people on the site “waiting list” that has signed up for it. I have no idea how many emails I have right now on the other list I’m keeping, but there has to be at least 50 or more. Some of these may be duplicates of the waiting list under the Renegade manifold page where you can sign up for an automatic email when they are in available again. If you are interested in one, please sign up for the waiting list at the bottom of that page. If all this goes well on this project, it won’t be a lot longer until they would be available again. I have a meeting with a machine shop this weekend to discuss the machining process of the project. If that goes well, the foundry is already lined up and I will do some test pours to see how they do and if good, it’s on to the machinist and then production after we check for fitment and any tweaks needed. I’m hoping for the best at this point. Stay tuned and keep watching this Blog for news on this project. Thank you all who have waited.

October 28, 2023

EBL ECMs added to stock today. Get them while they are available.

October 23, 2023

Well, it was inevitable, like I said it would. The price of the EBL ECM has gone up on this batch coming and the future EBLs. The same great quality of the EBL, stock tune and 100% laptop tunable if you need to change the tune via USB. I ‘m still cheaper than any of the other vendors for the same product. Hoping to have more later this week. Watch the Shop for availability.

October 19, 2023

Any and ALL orders have shipped out as of today. Also added more 84 fuel pressure assemblies and TPS test harnesses. The EBL ECMs are currently SOLD OUT and more are coming in about a week, but the price will increase. The new price is not currently posted yet. Hopefully, I can have some fuel pressure adjustment tools made up as well this weekend.

October 18, 2023

ATTENTION CUSTOMERS: We will be resuming normal business again this Friday. Any items purchased during this COVID delay will go out Friday morning. Sorry for the delays, but unavoidable. Also, we are almost out of stock on the EBL ECMs. Once this batch sells out, the price will go up on future sales. If you want an EBL ECM, now would be the time to purchase this item. Stay safe everyone.

October 11, 2023

ATTENTION ALL CUSTOMERS I was recently admitted to the hospital for contracting COVID and now released. However, if anyone is contemplating ordering anything, please refrain from that for at least another seven to ten days just to be safe since your order will not be able to be processed. I will post here when I will be able to continue with normal business. Thank you all and be safe.

October 3, 2023

All the NOS 82 and 84 FPAs are gone and never to return to the site. The regular aluminum FPAs are back in stock.

October 2, 2023

The last batch of EBLs just arrived today that will be at the current price. Once these are gone, the price will go up, unfortunately. If you need or want an EBL, now would be the time to grab one. Good luck and thank you.

September 27, 2023

Some EBLs arrived earlier than expected, so I added them to stock today. More are coming and I may see them by the weekend or first of next week. After that next batch of EBLs, the price WILL increase for sure. If you need or want one as a spare or for future engine upgrades, now would be the time to get one. Thanks again for everyone’s support. Enjoy your EBL.

September 25, 2023

Added more TB spacers to stock today. More items will be added later today. Have a great week.

September 24, 2023

Found some interesting items this weekend. I was going through all the boxes from DCS (former company way back in the Renegade days) Anyway, found a small box with fuel pressure assemblies inside, 82 and 84. These are NOS stainless steel assemblies that we used to make until they started breaking our tooling to make them because of the hard stainless steel tubing used back then. Good stuff, just hard on the tools. I have no idea how these will perform and will put these up online at a discounted price. We will NOT do refunds on these and ALL sales are final. There are more 82 assemblies than 84 FPAs. Once sold out, they will be removed from the site for good.

I will also try and have more of the usual 82/84 FPAs available today or tomorrow in stock. Fuel pressure tools may see an online presence today? More like some time this week because of delays in the creation process this weekend and have to start over on the laser process tomorrow on some. I should also have more 1/4” aluminum spacers done this week.

September 21, 2023

It looks like I should have more EBLs in stock next Friday 29, Sept. If you are looking for one, keep looking at the site next week. Good luck.

September 19, 2023

EBL ECMs are SOLD OUT as of yesterday. More EBLs are on the way. If you are looking for an EBL, check back early next week. Other items will also be added by this Friday.

September 12, 2023

Just to let everyone know, if you order an item from the site I try to ship out all orders the same day if the order is received before noon Arizona time. If after that time, your order will go out the next day. I do pride myself on getting orders out quickly which I’m sure everyone appreciates that. Thank you for your interest in XFire Performance products. Also, please don’t forget to fill out the customer survey which will arrived to you approximately two weeks after you received your item. I helps others make a decision on things.

September 5, 2023

I should have more parts coming in tomorrow for the fuel pressure assemblies. We shall see if I can get more ready for stock. Sorry for the inconvenience, but September 1st post says it all.

September 2, 2023

Added fuel pressure tools to stock. Enjoy!

September 1, 2023

Added more EBL ECMs into stock today. Enjoy if you were looking for one of these great units for your 82/85 Corvette or 82/83 Camaro, Firebird and Trans Am. Also, I planned on having more 82 and a couple more 84 corvette FPAs available, but one vendor sent the wrong parts for that to happen and had to reorder more parts. Hoping to have more either tomorrow or Monday. Lastly, I added a NEW item to the Shop. A custom machined aluminum tower spacer. Enjoy.

August 28, 2023

A NEW ITEM will be added soon. I have decided to also include in the Shop, the 1/4” aluminum throttle body tower spacer. I need to do a few things on this, but will be adding it soon. Watch for other items to be available soon also.

August 25, 2023

SOLD OUT of EBL ECM today. More on the way along with lots of other parts, some are going to be delayed unfortunately. I’m going to try and see if I can get more fuel pressure tools in stock this weekend. Watch the site if you are looking for one. Have a great weekend all.

August 17, 2023

Added more 82 fuel pressure assemblies to stock today. Get one while you can.

August 14, 2023

Added a NEW feature on some Out of Stock items. You can now sign-up with an email to be notified when the item you are looking for becomes available for purchase. I hope this feature helps people who want to be automatically notified.

August 13, 2023

Well, the 82 fuel pressure assemblies are sold out already. I didn’t think they would last very long. Sorry if you missed out this time, but I will try to have more available later this week. Keep watching the site if you are looking for this item. Popular items go quickly.

August 12, 2023

Added more 82 fuel pressure assemblies to stock. I suspect they will not last long and will be sold out soon. Good luck if you have been waiting for this item.

August 9, 2023

Added more TPS test harnesses to stock. Will try to have more 82 fuel pressure assemblies by the weekend. Thanks for stopping by and having a look.

August 3, 2023

EBL ECMs are now in stock again. More items will be added soon.

August 2, 2023

I looks like I should have more EBL ECMs available tomorrow. If you have been looking for a new ECM for your 82/84 Corvette or 82/83 Camaro, Firebird and Trans Am, now would be the time to get one while you can. Watch here or the Shop when available.

July 28, 2023

Update EBL: I should have more EBL ECMs next week some time. If you were or are looking for that item, keep looking at the Shop for availability and here in the Blog. They do not last long when in stock. Another thing to keep in mind, because it’s going to happen soon. The case supply for the EBL mod is running out and I can not use the ECM cases from any of the 82 thru 84 stock GM cases for the EBL. What does that mean for the 82/84 corvette or the 82/83 camaro, firebird and trans am owners? What that means is that I will no longer be able to get the EBL with my harness adapter module HAM board installed and most likely will have to find ECM cases from another source. This means the cost of the EBL will go up because of that added cost to this process and shipping of cases.

I just want to let owners know about this for any future sales once this issues starts happening. When will it happen? I do not have any specific dates, but it honestly will not be long and before it may happen by the end of the year or earlier I suspect. Just letting people know about this early. If you have any questions about this, give me a call at 480-269-1327 Arizona time which is three hours behind the East coast time.

Also, I received some parts for the fuel pressure assemblies and will have some available when the rest of the parts arrive, whenever that is. Thank you all for your CFI support. Added the complete throttle body rebuild service with the needle bearing service today. Check it out in the Shop.

July 22, 2023

UPDATE: The Renegade manifold project is getting closer to becoming a reality again as long as things keep going in the direction of things currently. I will have more on this in coming weeks as time permits.

Also, if you send me your throttle bodies to have anything done to them, please DO NOT send me your top plate. I do not need that item at all. Both throttle bodies will fit with the linkage detached on one end (remove clip from passenger side of linkage of TB) in a large, USPS box and will be cheaper than shipping them in your own big brown box.

July 14, 2023

WOW! that didn’t take long to almost deplete all the stock of 82/84 FPAs and tools.
NOTE: Any order that came in with the purchase of a tool will go out tomorrow, Saturday 15th. Sorry for the inconvenience this may have caused, but it is unavoidable for the cure time on tools.

Also, I still have EBLs in stock if you need one or have been waiting for one. Sorry, NO out of USA shipments will be made on EBLs.

July 13, 2023

Back by popular demand, I have added more 82/84 fuel pressure assemblies (FPA) and the fuel pressure adjustment tools to stock. I do not expect that these will last long, get them while you can since I do not know when I will have more available. Thank you for stopping by the Shop. Also, the tools will not ship until either tomorrow or Saturday due to curing time.

June 8, 2023

A NEW feature has been instituted for the site which is customer feedback/review on products. I’m a little late on this update, but I have a lot going on lately. Anyway, you should receive an email that you used when ordering a product approximately 14 days from the day the item(s) shipped out. This is normally no later than the next day after the order was placed. Please leave an honest review of items purchased or any other service that I provide, thank you.

May 25, 2023

More EBL ECMs where added to stock today. If you were waiting for them, they are available again.

May 22, 2023

I should have more EBL ECMs by Friday 26th, maybe Saturday 27th.

May 17, 2023

The EBL ECM is SOLD OUT as of today, but more is on the way. I started a new feature today as well, which is a customer review of the products purchased from the Shop. Not sure how that will go, but maybe it will help customers make a better choice on items. The customer as of today will receive an email to review the product(s) bought 14 days after the shipping day. Please review items honestly for others. As usual, if you have any issues with something, let me know right away so I can help. Thank you.

May 15, 2023

Just a little on the Renegade manifold project for anyone that is interested. It was looking great for M&M Competition Engines to cast and machine the manifold and still is actually except for one major issue, cost. I think the final cost to the consumer would be too high. With that said, I went back to the same foundry here in Arizona that we used in the very beginning when we started the Renegade project and they seem to be able to pour the castings, but their cost is somewhat high as well and at least I can live with their price. However again, I went back over to my local machinist who machined the Renegade back in the beginning and he retired and his business was sold to another company local here.

I went over and talked with the new company about machining the manifold on Friday. I’m waiting to hear back from them on a cost estimates and if they still have all my fixtures and CNC G-code for the project. I hope to have more information later this week on this project. Have a great week all.

April 27, 2023

Added more EBL ECMs today. Get them if you have been waiting, they won’t last long. Arizona sales tax has had to be added to the total price of the item due to software calculation error. Shipping is not taxed. Sorry for any inconvenience and the price increase.

April 25, 2023

GREAT NEWS! We are now starting a throttle body boring service for 2" inch and 2.15” inch. See Shop for details. We are also doing a BASIC and ADVANCED bushing service. Details will be posted in the Shop soon. You can either have your TBs bushed with a Bronze bushing which is the basic service or you can have a double sealed needle roller bear installed which is the advanced service. The roller bearings will last forever and have a smoother action on the throttle movement.

Hoping to have good news about the Renegade manifold this week as well. More on that as that project develops.

April 18, 2023

Well, the 84 FPAs sold out VERY fast. I guess a lot of people were waiting for them to become available? The EBL ECMs sold out fast this time as well and I suspect that the next batch that is coming will go rather fast as well. If you are looking for an EBL, watch the Blog for availability and the Shop.

I’m still working on getting the Renegade manifold project off the ground and hope to have some news about this later this week. The TB boring service WILL happen and we will ONLY do 2” and also 2.15” TBs for larger cube motors for now, more on this later and watch for the service to become available.

April 8, 2023

82 and 84 fuel pressure assemblies added to the Shop, Fuel pressure tools may get added next week. If you are an 84 corvette owner and have been waiting for the 84 fuel pressure assembly, best get one while you can. Good luck.

April 6, 2023

More EBL ECMs have been added to the Shop for those of you that have been waiting for them.

April 4, 2023

More EBL ECMs will be available this week for anyone waiting and wanting one. My guess is Wed/Thur. Watch the Blog and Shop for more information. More TPS test harnesses were added as well. Also, the 2” TBs have arrived and they look AMAZING! Look for the 2” base boring service to be added in the Shop.

March 30, 2023

Sorry for all the delays on things here, I had a family emergency a couple weeks ago and that has taken a front seat to everything this month pretty much. Hope to get back on track soon. I added more TPS test harnesses. I will be adding more EBL ECMs very soon, maybe this weekend or first of next week if you have been looking for one. The 82 FPAs are coming as well and with any luck so will the 84 FPAs.

There has been some very recent movement on the Renegade manifold. I am currently engaged talks with a company that I’m hoping they can pour the manifold tooling and machine the manifold at a good cost and I can start stocking them again after a LONG wait. Anyone who has been waiting for one knows exactly what I mean.

Also, the TB 2” boring service is very close to becoming a thing here and just waiting for the final inspection and then off to the races on that project. Check back here and the Shop when it becomes available.

March 1, 2023

Added more EBL ECMs to stock today. If you have been waiting for them, we have them. Sold out of the 82 FPA and fuel pressure tools almost immediately. Will have more in stock soon. Also, trying to get s few 84 FPAs in stock and hopefully I can on those as well.

February 26, 2023

Added some fuel pressure adjustment tools today. Enjoy! EBLs are coming, check site for arrival.

February 25, 2023

I should have more EBLs this next week, watch the Shop and Blog for that item. Working on getting some more fuel pressure tools in stock along with more fuel pressure assemblies. The TB resto service WILL happen, just had a little set back on getting all the parts ready for the laser. However, with that said, they are now finished and it shouldn’t be much longer and you will see the service added to the Shop. I think everyone who sees the new TBs will be impressed with the work and quality that went into this project to make it right. Stay tuned all for more things happening. Also, I have an appointment next week to have the Renegade manifold 3D scanned for maybe something special in mind, who knows? Stay tuned for that new project as well.

February 13, 2023

Added more items to stock today. 82 FPAs and more TPS test harnesses.

February 9, 2023

GOOD DAY TODAY! A boat load of back ordered parts came in today...Finally! I will try to have more things available this weekend or first of next week. If you were waiting for something in particular to become available, your wait is almost done. Sorry for any inconvenience.

February 2, 2023

More TPS test interface harnesses added to stock. Parts on order for more 82 fuel pressure assemblies. I have no idea when they will be in stock since the parts are backorder, which seems to be the norm nowadays.

February 1, 2023

More EBLs were added to stock today if you were waiting for one. More on TB Service soon. Also, just to reiterate on shipping…

ATTENTION!
A List Of Countries WE WILL NOT SHIP TO PERIOD, FOR ANY REASON:
Unfortunately, there are certain countries we will not ship to for ANY reason. This is usually a result of excessive fraud or lots of packages being lost in transit at some point.

Germany
Portugal
Spain
Philippines
Myanmar
Indonesia
Malaysia
Cambodia
Laos
Vietnam
Thailand
Nigeria
South Africa

January 20, 2023

New NEWS! COMING VERY SOON! I will be starting a throttle body restoration once again and a 2” TB boring service. We are also offering a needle roller bearing throttle shaft upgrade vs. just the standard bronze bushing. The needle bearing will probably outlast the owner and will provide for a much smoother operation with no further service required. The needle bearings are also compatible with a boosted setup if you should decide to do a turbo, supercharger or NOS charge the engine up to 125lb shot. The new service will be essentially three different services. (see below for descriptions) Pricing will come soon and be available in the Shop once implemented. Keep watching if interested.

SERVICE DESCRIPTION
1. A complete TBI Overhaul Services (Basic complete overhaul on all CFI TBs - NO BORING)
Consisting of: Degreasing, glass-bead blast, bush shafts with oil impregnated bronze bushings, (2) “new” IAC valves, (2) “new” IAC gaskets, “new” TPS sensor plus we will set the correct voltage for you to .525V. Balance the TBs as close as possible for plug-N-play operation. A “new” rear TB regulator diaphragm rebuild kit and “new” front TB compensator diaphragm, ultrasonically clean injectors, flow test injectors and, electrically test them, install “new” filters and O-rings, raise injector pod to 1/4" for each pod assembly for more air flow. Includes TB base gaskets, air cleaner gaskets and “new” Teflon washers for fuel nuts. (The Stock bore size remains the stock size) 3 weeks restore time once we receive your TB units.

2. TBI Boring Service
Consisting of: With this service we degrease, glass-bead blast, bore the bottom unit to 2.0", install custom fit blades, bush the shafts with oil impregnated bronze bushings and thin the shafts for better performance (air flow).  Includes custom cut TB base flange gaskets.  Does not include any  other gaskets or rebuild kit, O-rings or hardware. 3 week build time once we receive your unit. You can also upgrade this service to a double sealed performance needle bearing for an added charge.

3. A complete TBI Custom Overhaul and Boring Service
**NOTE: This IS the Ultimate TBI Overhaul of your units on the face of the planet which includes 2” boring.
This is the most comprehensive rebuild of your GM Rochester CFI 400 TBI units, NOBODY on this earth is doing this type of detail work, NOBODY!  We combine Service #1 and Service #2 to give you the most complete and ULTIMATE Rochester 400 build on the market today. 

**We also give you the following upgrades that are not included in Service #1 and #2: 
1.  (2) 1/4" custom laser cut 6061 aluminum pod spacers, not double gaskets or any other cut material.

2.  The best bearings on the market (double sealed needle bearing upgrade).  We do not add or delete anything on this service.  It is as described.

3. Custom cut throttle plates that are anodized and laser etched.

3.  We resurface the bottom of the base on our mill for a perfect flat and finished look.
This service will also require 3 weeks restore time once we receive your TB units.

NOTE: We will NOT accept any bad throttle bodies, rusted, none functioning core units. It isn’t worth our time and the money it would take to try and restore that type of TB condition.

January 11, 2023

Almost everything that was put into stock on Sunday night is gone including all the EBLs. May take another week or so to restock if you were looking for something. keep checking the site Shop for availability.

January 7, 2023

A few items were added today to the Shop and are in stock. EBL ECM, 82 fuel pressure assembly, fuel pressure adjustment tool and TPS test interface tester. More will be added soon… I suspect that these items will not last long. Also, some pretty good news maybe to be added as a service. It looks pretty good to start the Throttle body restoration service to include boring TBs to 2 inch. More on this possible service in the coming weeks. Watch the Blog for more information.

January 6, 2023

Happy New Year everyone! With the new year will be more available stocked items as promised. Should have some items ready to go and available in the Shop on Monday 9th. to include more EBLs. Keep watching the site for more news and availability.

December 28, 2022

Hope everyone had a great Christmas. More EBL’s will not be in stock until after the first of the year. If you are looking for one, start looking at the site for availability around the end of the first week. Have a Happy New Year’s and be safe.

December 17, 2022

Merry Christmas and Happy New Year to all. I will not be adding anything for the remainder of the year to stock. Stop by if you are looking for something, after the 1st of the year.

November 28, 2022

Hope everyone had a great holiday weekend and Thanksgiving! We are now open again for business. BTW, if it doesn’t say Sold Out, it is in stock.

November 19, 2022

Hello everyone! The Shop will be closed until November 30th for the Thanksgiving Holiday. Hope everyone has a great Thanksgiving. All orders that were purchased today will go out today. Thank you.

November 3, 2022

82 fuel pressure assemblies added today for anyone that has been waiting on them. I may do a few 84 assemblies as well, we shall see. Also made some minor text changes.Thanks again for your patience.

November 1, 2022

GOOD NEWS! After a long wait…Fuel pressure adjustment tools have been added into stock today. More will be added soon. If you have been waiting for them to become available, now would be the time to get one. More 82 Fuel Pressure Assemblies will also be available soon. Thank you everyone for your patience. Have a great week.

October 17, 2022

Well, that was quick! All the 82 fuel pressure assemblies are gone in just two days…Wow! More to come and sorry if you wanted one, and they were sold out.

October 15, 2022

Added more 82 Fuel Pressure Assemblies into stock. Enjoy!

October 12, 2022

EBLs are again running low in stock, but there are still a few left. Shipping cost have gone up again and my shipping is now flat rate $13.00 per shipped USPS box or envelope.

October 5, 2022

The EBLs are available again as of today for anyone that is in need for one. Ready to go, just order one.

October 3, 2022

Good News! More EBLs will be available this week. Should have more either Wed or at the lasted on Thur. Keep watching the Shop if you need or want one.

September 24, 2022

The EBLs and the 82 fuel pressure assemblies are SOLD OUT as of today. I will try to have more in a week or so along with the fuel pressure tools. Stop by and see when these items become available in the Shop if you are looking for them.

September 18, 2022

WOW! The EBLs went fast for sure and only have one left in this bunch. Thank you to everyone that purchased an EBL and I’m sure you will be happy and enjoy it. All the orders will go out tomorrow morning, thank you again.

September 16, 2022

Added some 82 fuel pressure assemblies into stock today. More as the parts trickle in that are on back order. If you have been waiting for an EBL, they will be here very soon, watch for availability when they arrive. GOOD NEWS…The EBLs arrived early and are now available online again as of today. See the Shop

September 9, 2022

More EBL ECMs are coming next week for anyone looking for one, keep looking on the site next week. Hoping to have more fuel pressure assemblies next week as well. Back orders are killing me right now and having to source other vendors is painful during these crazy times we now live.

September 7, 2022

A minor setback today. Received notification that some of the fuel pressure supplies ordered are now back-ordered due to manufacturer delays. This is getting crazy IMO, but I will try to out source these parts with somebody else for the time being. Sorry for the inconvenience and check back with us.

September 3, 2022

SOLD OUT of EBL ECMs. More on order as of today watch site for availability. Ordered more parts for fuel pressure assemblies, more on that when parts arrive. Prices have gone way up on parts, some have doubled just since my last order. Thank you for your patience and have a great holiday weekend.

September 1, 2022

An BL was added today and more to follow in about a week. If you need one or looking for one, grab it now.

August 24, 2022

Added EBL ECMs to stock today. They will go fast…

August 14, 2022

Added more 82 fuel pressure assemblies today. I suspect they will go quickly. Tools will be added as well, but they are slow going right now.

July 29, 2022

Removed more items today from the site. Still looking to have more things available this weekend. Also added more TPS test harnesses today to stock.

July 28, 2022

Removed some items from the site and may not be sold again. More things may also be removed in the future due to supply chain issues. Still trying to get some tools, TPS harnesses and 82 fuel pressure assemblies out this weekend. Keep watching for more info on that. Thank you for stopping by.

July 19, 2022

OK folks…It has been a while since my last post here. Why, because it’s been hotter than the face of the sun here in Arizona everyday for weeks and the shop is not air conditioned…yet and wiring has been installed for AC. 115 degrees outside means 118 or more inside. It looks like it may get a little cooler this weekend and then I can get back into the shop to get some things ready for the store inventory. Sorry if this major setback if this has people concerned, but can not be helped right now. Thanks for your patience. Check back again this weekend for more info.

June 23, 2022

Added TPS test harnesses into stock today.

June 12, 2022

EBLs are selling rather quickly! I only have two left and I received the shipment only yesterday.There must be a lot of dead ECMs out there or maybe stocking up on one just in-case their ECM goes bad. Good move either way since you can not find a stock GM ECM that is reliable anymore.

June 11, 2022

I’m a little late getting this out, but I have more EBL ECMs that came in earlier today. If you were looking for an EBL, now is your chance to pick one up. They are ready to go, Plug-N-Play for 82/84 corvette and 82/83 Camaro, Firebird and Trans AM with a different tune that is on the CD and will need to be loaded. The corvette comes pre-loaded.

Also, I had to raise the cost just a little bit, but it is still much cheaper than others are selling this product for. ZIP corvette sells the EBL which is exactly the same as this unit and has MY HAM board installed and MY tune installed for the 82.84 corvette and they sell it for $1,099. You WILL pay more for the same thing I sell for less, take your pick.

June 4, 2022

EBLs are sold out, but more are on order. Hoping to have more later next week with any luck and USPS help. May have a couple other items in stock as well. It has been a crazy last two weeks. As far as parts go, it is nuts how long it is taking on some things. For an example, but not that it effects anything from this site. I blew a drag radial, MT ET Street R tire by hitting something in the road and destroying the tire sidewall. This was back in February, I still have not been able to replace the tire and being told that it may be another two months. How crazy is that? When I get more parts, I will post it on the site in the Blog and Shop for all to see. Thank you.

June 1, 2022

EBL ECMs are sold out. A new order will be placed and may take up to two weeks to get resupplied again. Parts on order for various items…still waiting.

May 20, 2022

The EBL ECMs arrived today. They are online and ready for purchase. Good luck to anyone that was waiting for them.

***AGAIN…for ALL the out of country customers. If you would like an EBL ECM or anything else, please use the Contact page to inform me that you want one when available or something else and I will invoice you via PayPal. The website will not allow you to order directly for out of country purchases. Also, keep in mind that shipping cost is crazy right now for any shipments going outside the USA via USPS. USPS will not let me ship via Priority Mail outside the USA, ONLY Express Mail, even if packed in a Priority Mail box.

May 18, 2022

The EBLs should be here tomorrow sometime. Have a look at the Blog and Shop for availability.

May 16, 2022

I will have more EBLs ECMs this week, maybe Wednesday or Thursday. Watch the Blog here and the Shop for availability.

May 8, 2022

Had to make some price changes to keep up with inflation on the parts end and my machinist price hikes. Hopefully, I won’t have to raise them again, but in these times who knows what’s going to happen next. Also, I should have more fuel pressure adjust tools available sometime this next week along with some more TPS test harnesses. Parts on order for 82/84 fuel pressure assemblies and EBLs. Should have a lot more in stock soon. Keep watching the Blog and the Shop for availability.

May 6, 2022

The EBL ECMs have sold out once again rather quickly. I’m waiting on more to arrive, but it may be another week before any of them get here, maybe longer. If you are looking for a ECM and they are in stock, I wouldn’t wait long to decide if you want to purchase one. They do go quickly since you can’t find any reliable OEM ECMs anymore. The EBL is a great choice and replacement ECM for any CFI vehicle and the best part is they come pre-loaded with an 82/84 corvette stock tune. It doesn’t get any better than that. Also, if you want to change the tune, you can and if you mod your CFI car, you can change the tune to accommodate the mods added. 100% laptop tunable if you want to do that.

Watch the Blog and Shop for more EBLs to come into stock. Thank you and have a great weekend all.

May 2, 2022

A note on the 84 FPA. The 84 FPA is a low demand item for the most part, far less than the 82 FPA. The 84 FPA is also much harder to make than the 82 FPA and for this reason, the 84 has been less in stock than the 82. We seem to have a hard time keeping much of anything in stock which I guess is a good thing, but it brings on other issues. We will try to get some 84 FPAs in stock, but there is no timeline on this item. I hope this helps to all that have asked us about this item and there have been many.

May 1, 2022

Price increase on both the blank off plates and TPS test harness due to increased parts cost. Machining cost have gone way up now along with material.

April 29, 2022

More TPS test harnesses added to stock today. Going to try and get more 82 fuel pressure assemblies in stock this weekend if possible.

April 25, 2022

WOW! Sales this weekend went through the roof. Everything that was added is gone except a couple of EBLs. Thank you to all that purchased items. I will try and get more things is stock this week.

April 24, 2022

Added more TPS test harnesses to stock today.

April 23, 2022

The long awaited fuel pressure adjustment tools that so many have been waiting patiently for are now in stock again. If you wanted one of these, now is your chance to get one. Will also try to get more TPS test harnesses in stock. but it probably won’t be until next week. Enjoy!

April 22, 2022April 22, 2022

Added more TPS test harnesses this morning and they are gone already, more to come soon. Also, the EBL ECMs came in a day early which was a surprise. If you were waiting for one, now would be a great time to purchase one. These have been impossible to keep in stock lately. The fuel pressure tools may be in stock this weekend depending on a few things, but all the parts are now here and ready for assembly. Have a great weekend all.

April 20, 2022

Once again the EBL ECMs have SOLD OUT. Hoping to have more by this weekend and will be posted here and in the Shop when that happens. Keep watching if you are looking for the EBL ECM to become available. They go quickly because of the large demand.

Also, I received all the parts from the machinist and can start the assembly process of the fuel pressure tools that have been out of stock for some time. Watch the Blog and Shop for availability.

Not to sure about the 82 fuel pressure assemblies or the TPS test harnesses. The TPS test harnesses went very quickly and I wasn’t anticipating the quick sell out. Again, watch here and the Shop for availability on these items.

April 17, 2022

I have added more EBLs ECMs to the Shop for anyone that has been waiting for them. Also added more TPS test harnesses. I should have more EBLs in two weeks or less. Email’s have been sent to customers that have been on a waiting list for EBLs. I Also will have all the parts on hand tomorrow to assemble the fuel pressure adjustment tools and should be able to add some this week some time. The machining on these parts has taken forever, but now done. Thank you to all that have been patient waiting for this item. One last item, I have pulled the HAM board from the Shop since I no longer sell just the HAM board and it is already included in each EBL. Thank you everyone and hope you had a Happy Easter.

April 4, 2022

I just got off the phone with my new machinist and I decided to at least make one more stab at making the fuel pressure tools again and he seems to think that he can deliver the parts to me by April 20th, maybe sooner. So with any luck, I will have more in stock around the 20th of this month or sooner if possible. The down side is the price will go up a little since all the prices for metal has gone up along with machining prices. So, if you were looking for these to be available again, you are in luck. Watch the Blog and Shop for availability.

The EBLs are coming along and the manufacturer is trying desperately to fill the huge backlog of units. Watch here for the EBL availability as well. Have a great week all.

March 31, 2022

More TPS harnesses will be available soon. However, my parts supply is low and parts are on order. Keep watching the Blog and Shop for information on that item and others. All the 82 fuel pressure assemblies are sold out again. I may have a few more next week as well.

The new EBL is coming. manufacturer is trying to clear out a huge backlog after trying to clear up a parts issue for that item. Keep wathing for more information on that item as well.

March 23, 2022

Added more 82 Fuel Pressure Assemblies today. I suspect that these will not last long and go quickly since there has been more demand for these assemblies lately. Get them while you can if you have been waiting.

March 18, 2022

Yesterday was a crazy day for sales, specifically for the 82 fuel pressure assemblies. One hour after going into stock they were all sold out. So, I will try to have more next week and see how long they last. Thank you to everyone for the sales. Enjoy our product!

March 17, 2022

Added some 82 fuel pressure assemblies to stock today. Also…The price for the 82/84 fuel pressure assembly has gone up along with the fuel pressure adjustment tool. I have no choice in this or stop providing these items due to cost hikes. It has been a long time since any prices have gone up and I have tried to keep the cost low and still provide quality products. I hope the cost stays where its at or it may go up again or I will just stop providing these items all together. Sorry for the good and bad news for anyone waiting for these items.

March 12, 2022

HOT NEWS! I have been contacted by the EBL manufacturer that the EBL has been upgrade with a new chipset and firmware. The What’s Up Display (WUD) software has also been upgraded. The new software version will be 3.1 vs the old version 3.0i. The new WUD software will be backwards compatible with the older EBL boards which is great news for for the older users. Also the new ECM firmware that is going to be released will have progressive nitrous (N2O) control (if desired) if anyone is going to install a bottle. Great news for those people for sure. No firm date on when the new EBLs will be available, but it still looks like this month some time. Keep watching the news here for details on the release and when I may have some available. You heard this news on the EBL ECM here first, even the manufacturer hasn’t updated their site yet on this great news.

*Also made a update to the EBL ECM description narrative in the Shop to include 82/83 camaro, firebird and trans am CFI cars. Sorry guys, I can’t believe I missed that in the description.

March 11, 2022

Still waiting on the release of the next EBL shipment. It still looks like it may be towards the end of March before I can get them. There was a chip shortage and then the chip manufacturer stopped making the chips altogether for the EBL. Now a newer style chip was sourced and they are gearing up for those EBLs to be manufactured. Keep watching here for more information on the release and in stock items. Have a Great Weekend!

March 7, 2022

A few 82 fuel pressure assemblies added to Shop. If you were waiting, get them while you can.

March 3, 2022

WOW! It’s March already…time is flying this year so far. made some minor changes to the wording on the HAM board to clear a few things up about the board and the EBL. I’m going to make an effort to get out some 82 and maybe some 84 fuel pressure assemblies this weekend. I’ve been pretty busy and got bogged down with lots of other things this week. Watch the Shop and the Blog for more on this subject. Happy March all!

February 26, 2022

HOT! I received a shipment of a couple EBLs today. This unfortunately will be the last shipment until the end of March. The manufacturer said they can not ship any EBLs out until at least the end of March after last Friday due to parts issues. If you are looking for an EBL and need one now, now would be the time to get one while you can or you will be waiting at least another month, maybe longer. Good luck and happy motoring.

February 23, 2022

Hello all. Well, you knew it was bound to happen at some point with all that is going on in the world lately. I talked with the owner today and the EBL Flash II has run into some parts procurement issues (supply chain) and it won’t be until around the end of March before I will be able to get any more units after this batch coming to me next week.

I will start a list of people wanting one if you send me an email from the Contact page that you are willing to wait until the end of next month for one.

Also, I may have some more 82 and 84 fuel pressure assemblies next week, but not a lot. Watch the site for the availability. One last note, I may discontinue the fuel pressure adjustment tool, not entirely sure yet. The issue is the machining cost is gone through the roof for the machined parts for this tool and would have to pass this on to you, the customer. Not sure about this one… Watch the site for more info on this item as well. We all can thank the tanked economy for all this and the current administration.

February 16, 2022

The pressure tool is still an on going issue at the moment and hope to get that resolved soon. Also, the EBL ECMs are sold out, but hoping to have more by the end of next week with any luck. Keep watching the site (Shop) and here for availability announcement. Have a great rest of your week.

February 8, 2022

It appears that the machining costs have gone up. I have everything that I need to put together the fuel pressure adjustment tools, but I have to look at the increased cost to have it machined and make a decision on what to do with this item. I will post up more on this either later this week or next week.

January 26, 2022

More EBL ECMs have been added to stock today. Get them while you can if you have been waiting for them to arrive.

January 25, 2022

Well, some more bad news. The EBLs that were supposed to be here yesterday are held up in shipping somewhere. The never ending shipping debacle. As soon as I receive the shipment, I will be posting them up in the Shop and here.

Added more TPS test harnesses today if anyone was waiting for them to become available.

January 21, 2022

OK, good news and not so good news… Good news is some of my orders have come in to day and I should have more EBL ECMs on Monday. Bad news, I had to cancel some orders because of the NEVER ending backorder and reorder things. I ordered almost $1,000 worth of parts and hope things will be here somewhat soon with the new companies I’m going to be dealing with. Hoping to have more 82 and 84 fuel pressure assemblies and fuel pressure tools soon. Also, maybe have more TPS sensor test harnesses in stock as well. Keep checking back to see what’s in stock. Thank you for your patience and have a Great Weekend!

January 17, 2022

EBLs are SOLD OUT! I have more coming and should arrive within the next week and a half. I will post here when they arrive in stock. Good luck on the next go around with the EBL ECMs.

January 16, 2022

Price change on the EBL ECM. Due to USPS postal rates increasing, I had to increase my price on this item slightly. Also, as usual, this item sells out usually very quickly and I only have one left if anyone is needing an unit.

January 14, 2022

More EBL ECMs added to the site today, sorry for the delay in posting these.

January 11, 2022

It looks like I will have more EBL ECMs this Friday for anyone looking to purchase this item. Keep watching the Blog and Store for availability on any item.

January 9, 2022

Hope to have more EBL ECMs in stock this week, but we shall see how the shipping goes.

January 5, 2022

HAPPY NEW YEAR TO ALL! We have SOLD OUT once again with the EBL ECM’s. More EBL ECM’s will be added soon. There will be a new 15% restocking fee for 2022 and moving forward for any returned item that is not covered under a warranty return. In other words, if the item is not bad, broken or defective, we will change a 15% restocking fee on that item(s). If it is bad, broken or defective, we will replace it at no change unless the item was damaged by the user or installer. We are still fighting with company’s on delivery issues. COVID IS always the excuse, but that is getting old. We hope to have more things in stock as time moves on this year. Sorry for any inconvenience to anyone waiting for something.

Also, there is a little movement on the Renegade intake manifold. Move on this to come, keep coming back to see what happens on that project.

December 25, 2021

Santa dropped off a few more TPS test harnesses today.

December 24, 2021

MERRY CHRISTMAS TO ALL. REMINDER…for ALL the out of country customers. If you would like an EBL ECM or anything else, please use the Contact page to inform me that you want an EBL ECM when available or something else and I will invoice you via PayPal. The website will not allow you to order directly for out of country purchases.

December 22, 2021

I have had some questions about items in stock lately. Just to clearify, if the Shop shows anything except OUT of Stock, the item is IN STOCK. I hope this helps everyone out.

December 21, 2021

Added some 82 and 84 fuel pressure assemblies, enjoy! Fuel pressure tools are being held up by parts not coming in and back-orders… Sorry and not my fault. Merry Christmas.

December 19, 2021

Just added more EBL ECMs to stock and are available. They are already going quick, get them while you can.

December 14, 2021

The HAM board shipment came in, but the EBL ECMs did not and are delayed. I’m hopeful that they will arrive this week though and will post them online as soon as they arrive. It is the Christmas season and things do slow do for shipping.

December 12, 2021

It appears that the new shipment of HAM boards will be arriving this Tuesday and the EBL ECMs should be here tomorrow, Monday the 13th sometime. This is all based off of the shippers tracking and it has been off a little due to the holiday rush. Watch the Blog and Shop for in stock items. I also just sold out of 82 FPAs and TPS test harnesses. Hope to have more in before Christmas.

December 9, 2021

MERRY CHRISTMAS TO ALL CROSSFIRE CUSTOMERS! Hoping Santa will drop off more EBLs next week. If you would like to be put on a list to secure a purchase, use the Contact page and send me mail. I already have people in line, so don’t wait too long if you are looking to purchase one…Christmas is coming and shipping will slow down a bit. The sooner you act, the better.

December 6, 2021

EBL ECMs added to stock, get them while you can. Excellent choice as a spare ECM as well.

UPDATE: All the EBL ECMs were sold out within 30 minutes of them going online…WOW! Ordering a new batch today. Will post when available here. I wasn’t joking that they go quick. Thank you for your purchases, enjoy!

December 5, 2021

The EBL ECMs have arrived and will be added to the site in the morning. If you wanted one, better get one before they sell out.

December 2, 2021

The EBL ECMs should be available on December 6th, Monday. Look for them in the Shop.

December 1, 2021

Fuel Pressure tools added today, get them while they last if you have been waiting for one. Also, I should have 82 and 84 fuel pressure assemblies this week in limited supply. 82/84 fuel pressure assemblies have been added to the Shop. The fuel pressure tools that were added today are already SOLD OUT.

November 29, 2021

Parts on order for fuel pressure tools, will post in here when available. I will try and get the 82 and 84 fuel pressure assemblies in stock this week if you have been waiting for them. Also, the HAM board has gone on sale for a BLACK FRIDAY belated sale starting today until December 3rd. 2021. Get it while you can and use discount code HAM. I should have more EBL ECMs in stock soon. They sell out VERY quickly. Watch for availability. I hope you all had a great Thanksgiving!

Lots of interest in the Renegade manifold lately. Unfortunately, I haven’t found a foundry that will pour them at a reasonable price yet. If I do find a foundry, I will definitely post it on here to let people know.

November 24, 2021

NOTICE!: The EBL ECMs arrived today, two days early and they are all gone already. It did not take very long at all to sell out of all the ECMs. Fortunately, even though I did not know that the EBLs would arrive today, I reordered more this morning. I hope to see them arrive before the end of next week. Keep watching the site for them to be stocked. Sorry if you did not get one and was waiting for an EBL.

November 14, 2021

IMPORTANT! Well, the entire EBL ECM stock has been depleted overnight. I was not expecting that to happen, that fast. So, I will have more hopefully within the next ten days. Keep coming back to the site to see if they are available again if you are looking for one. It would also be nice to just have an extra ECM just in case kind of thing, since you never know when these old ECMs will die after almost 40 years of use. The EBL Flash II is state of the art and along with the HAM board, you should have many years of trouble free use going forward. AGAIN…for ALL the out of country customers. If you would like an EBL ECM or anything else, please use the Contact page to inform me that you want one when available or something else and I will invoice you via PayPal. The website will not allow you to order directly for out of country purchases.

November 13, 2021

The NEW EBL ECMs have arrived…GREAT NEWS for CFI owners. They will be added to the site Shop. Price has been set. This ECM also includes the HAM board installed, ready to go into your corvette. They are going quickly and only a few left already.

November 11, 2021

To all that have served…HAPPY VETERANS DAY!

November 9, 2021

More TPS Test Harnesses were added today. Enjoy! It looks like the EBL ECM will be here Thurs or Fri. Watch the Blog and Shop for details.

November 6, 2021

The NEW EBL ECMs should be here next week sometime. Looking forward to having these in stock. Also, should have more TPS test harnesses added in the next day or two.

November 5, 2021

I should have some EBL ECMs next week sometime if anyone is in need of one for their CFI Corvette, Camero, Firebird or Trans Am. Stay turned for more information on this.

October 31, 2021

TRICK or TREAT! Added more TPS Test Harnesses to stock in limited quantity. Get them while you can if needed.

October 30, 2021

Added some changes to the NEW item we are going to carry, the EBL Flash II ECM. More changes will come and will have some in stock very soon. Enjoy the NEW item.

October 29, 2021

Well, it’s been a little while without posting anything. I have been rather busy with business and my own vette and upgrades. AVAILABLE SOON On the company news front, I will start carrying the Dynamic EFI, EBL Flash II ECMs compete package in stock soon, ready to install. This should item should be available maybe as early as next week sometime. If not, early the following week for sure. It will be nice for a me to be able to offer a complete ECM package for cutomers to send out the day of order depending on when during the day it is ordered. At worst, the next morning shipped out. Look at the site for an EBL available on site in the Shop.

October 17, 2021

More 82 fuel pressure assemblies have been added to the Shop. TPS test harnesses are also coming this week. The 84 fuel pressure assembly may take another week unfortunately. Get them while you can.

October 4, 2021

Well, it was bound to happen. The USPS raised their shipping rates again, so I have to raise mine as well. The new rate will be added with every order. Should have some more items in stock soon, it has been rather busy here lately.

September 13, 2021

Added more TPS test harnesses to the inventory today. I’m sure they will not last long. Get them while you can.

September 2, 2021

Made a few changes on the back-end of site to correct the url wording for items. They worked, but were not correct, now they are. Been busy with my new tune so I haven’t been putting in the time on other things. Hoping to get time either this weekend or next week to add to Shop items again. Sorry for the delays.

August 27, 2021

Just a reminder to the people looking at the site from outside the USA. As long as your country is not on my “no ship to list”, you can send me an email from my Contact page saying what items you want to purchase and I will send you an invoice from PayPal for those items. Our system will not automatically let you purchase from outside of the USA. Sorry for the inconvenience.

August 22, 2021

Added more fuel pressure adjustment tools for anyone that was waiting for them. Enjoy!

August 18, 2021

I’m going to try and have some more fuel pressure tools available by this Friday if possible. Watch the Shop for availability. Made minor changes to the Contact page. Also added more pictures and text in the My 82 Crossfire page on some up-grades I did recently, check it out.

August 17, 2021

The Shop is now open again for sales. We returned early and I added items back into stock. I will try and put more things out there this week. Thank you for waiting…

August 7, 2021

The Shop is now CLOSED for ALL SALES until August 21st. See you all then and thank you for visiting.

August 2, 2021

Mark your calendars…The Shop WILL once again be CLOSED from August 9th thru August 21st. If you want something, you must purchase it before August 9th. This is temporary and the Shop WILL be back open for business August 19th.

July 26, 2021

Unfortunately, all the fuel pressure adjustment tools are sold out already. I possibly may have more later this week. Keep checking back if you are looking for the tool. They went massively quick this time.

July 24, 2021

Added more fuel pressure tools to the inventory today. Also, corrected the blank off plates that were incorrectly shown as out of stock.

July 23, 2021

Added more TPS test harnesses today. I may have some more tools available next week. Keep checking back if you are looking for that item.

July 16, 2021

Added more 82 fuel pressure assemblies today. Get them while you can if you have been waiting for them to be in stock. Should also have some TPS harnesses available this weekend. Check back and see if available.

July 15, 2021

We are OPEN again and a few days earlier than expected. Sorry for any inconvenience this may have caused. We will be closing the Shop again in August for a few weeks also. I will post the dates later as it gets closer. More items will be available soon to replace the items that are out. Please keep checking back.

June 30, 2021

The Shop will close at 2pm today Arizona time and will reopen July 19th. Sorry for any inconvenience this may cause.

June 28, 2021

HEADS UP! The Shop will be shut down from July 1, 2021 and reopen July 19, 2021. If you want an item that is in stock, now would be the time to get it before it shuts down for a few weeks. Just want to let people know. Thank you!

June 24, 2021

We have SOLD OUT again in a few of the popular items in the Shop. The Tool, 82 FPA and the TPS harnesses. Will try to refill these items soon. They do go pretty quick, so if they are available and you want one of these items, it would be to your benefit to pick them up or wait longer.

Also, we will be shutting down from July 1st thru July 18th. We will reopen for business on 19 July. Have a great 4th of July.

June 22, 2021

Added more text on the HAM board page concerning the stock CFI tune for the 82/84 EBL Flash II ECM. Read more about that in the May 2021 posts below.

June 21, 2021

Talked with a couple foundries today. We shall see if anything productive happens in the way of pouring manifolds at a good price. My new 82 project is going slow at the moment. The weather here has kicked in for the summer and at 118 degrees, it isn’t fun to do anything here right now. This project will progress more as the temps here go down…around late September or October. More on this project later.

June 17, 2021

Finally! 84 fuel pressure assemblies are available. Get them while you can if you have been waiting for them.

June 15, 2021

A few more fuel pressure adjustment tools were added today. 84 fuel pressure assemblies are coming and with any luck will have some tomorrow.. Also made a change on the Contact page to reflect Arizona time which is three hours behind the East coast time. Been getting a lot of calls coming in at 6 to 6:30am. It may be 9am where you are, but it is 6am here in Arizona and we do not answer the phone that early, sorry. Call us back at noon your time if you want us to answer or leave a message.

June 8, 2021

Added the fuel pressure adjustment tool to the inventory today. Should have some 84 fuel pressure assemblies done this week some time.

June 6, 2021

Added more 82 fuel pressure assemblies and TPS test harnesses today. The 84 fuel pressure assemblies should be in stock sometime this week along with the fuel pressure adjustment tool for anyone looking for those. Enjoy and Happy D-Day!

***May 29, 2021

THE TUNE IS FINAL… Well everyone, the wait is over and the tune has been finalized. The tune works great and should give you the best starting bin ever for the stock corvette crossfire engines, 1982 and 1984. You can easily just load this tune and drive the car and enjoy it, or modify the tune to your liking if so desired. In my opinion though, I would leave it alone, it is that good with plenty of get up and go. The tune has been optimized at a 13psi fuel pressure setting which is the high end of the GM spec and is set at six degrees BTDC of initial timing which again, is GM spec. This tune is for a “stock” 82 or 84 corvette only using the HAM board and the EBL Flash II ECM upgrade from Dynamic EFI.

I will be sending this tune out to all the owners of a HAM board for free soon to try this tune out and see if they like it. If not, just load your old tune back and press on. I sincerely think you will leave this tune loaded after you test drive your car. If you purchased a HAM board from us and have not received an email with the tune bin and would like to try it, please contact us from the Contact page. Enjoy all and have a GREAT WEEKEND AND HOLIDAY.

**May 27, 2021

MORE TUNE RELATED NEWS… When the stock 82/84 tune is finalized, I will be sending it out to everyone who has purchased the HAM board this year since January to try out. If you do not want to use the tune, you don’t have to and is going to be sent out as a customer service kind of thing to help owners out. I will also go through all the customers from last year who purchased the HAM board and send it to them as well. As always, loading this tune will mean that you except responsibility and will be at your own risk and I do not except any responsibility to the tune other than knowing that it has been thoroughly tested on a 82 CFI corvette in stock format.

*May 26, 2021

More Renegade gaskets are now available if anyone was waiting on these. Hope to see more items available this weekend if possible. Have a great Weekend all.

CFI NEWS WORTHY OF IMMEDIATE POSTING…Myself and two others have been working on developing a stock tune for the EBL Flash II which is a direct swap in conjunction with the HAM board upgrade for your stock GM ECM for your 82 or 84 corvette. We have been using two 82 corvettes as test mules and a third 82 will come into this test this weekend. All three cars are bone stock. The tune is pretty good I might add and is about 99% done. The VE, (volumetric efficiency) or fuel tables are dialed in already and just making some changes, adjustments to the SA, or (spark advance) table and a couple other related areas. Both 82 owners said they love the performance gain over stock so far and both say they chirp the tires now when shifting into 2nd gear at WOT. They also said that they have never been able to that before this tune. The third 82 will get the same tune as the other two, but also will get tweaked even further and then the tune will get finalized and all cars will get that tune to run.

This tune will be given out to anyone who purchases a HAM board which means they will be getting the EBL Flash II upgrade as well. What this means is, the car owner should not have to do anything to the tune if they do not want to. Just upload the tune Bin file, hit the key and drive the car. We have been devoloping this tune for CFI owners so that they don’t get intimidated by the fact that the EBL Flash II makes the engine 100% laptop tunable. You don’t need to worry about that now, we have taken the tuning process out of the equation. Again, you can further tune the engine if you so desire, but this tune is pretty good as is and will give you more zip in your step as it were with this tune over the stock GM tune and still retain the GM initial timing settings of 6 degrees BTDC which is much more conservative. This tune is not real aggressive, but does have more power than stock and is optimized at a 13psi fuel pressure, which is a GM high side spec setting. It is also assumed that your throttle bodies are balanced correctly which makes a huge difference on the idle quality. See the videos in the FAQs #22 about balancing the throttle bodies if you are not sure what that means or how to do that.

I hope everyone that uses this tune will be happy and makes it truly a turn key stock CFI type of setup. Thank you everyone that has contributed to this tune project, it is much appreciated. Everyone will benefit form this project.

May 24, 2021

SOLD OUT of a lot of popular items again. Hoping to replenish these Out of Stock items later this week or weekend. I’ve been very busy once again with the manifold project and that is taking up a lot of my time right now. Keep checking back for more information on things going on here. Thank you for your support.

May 22, 2021

Made some site changes just to see how it goes over. One of the changes/additions was on the HAM board page. Added the fact that we are in the process of developing a stock tune for the 82/84 corvette for the EBL Flash II ECM to help people who buy the EBL for their corvette and do not want to laptop tune their engine or do not know where to start the tuning process. This will be more of a Plug-N-Play type tune to get you cruising again in your corvette in short order. More on this as it evolves.

May 20, 2021

UPDATE: A little more information on the manifold. NDA sent to manufacturer and specific documents needed sent to them. Should hopefully hear from them next week sometime and will post any progress or good news. I’m somewhat hopeful with this company since they have done intake manifolds in the past. Keep checking back for more on this project.

May 17, 2021

More TPS test harnesses added today.

May 16, 2021

I finally received the machined parts for the the fuel pressure tool and may have some available this next week. Also, I will be receiving parts first of this week for the fuel pressure assemblies and may have those available for the 82 and 84 corvettes. Keep an eye out for those items in the Shop and Blog updates.

I made added some text changes to the FAQ section for better clarity on some answers. I hope it helps those looking at those understand better.

Also, an update on countries I will NOT ship to for any reason: China, Russia or Iran. These countries would be in addition to the other countries I have listed in an earlier Blog post. All other countries that are not on my NO SHIP list and want items MUST use the Contact Us page and submit a request and if approved will be sent an invoice.

May 10, 2021

Made some minor changes to text in the FAQs and added more important information. Also, contacted some foundries today about the Renegade manifold pours. Waiting to hear back from them on this to see what they come up with as far as price and if they are capable of doing the pours. More as this progresses…

May 4, 2021

Added a few fuel pressure adjustment tools today, but already going fast. More to come soon.

April 30, 2021

Due to lots of phone calls and emails on How To Balance my throttle bodies. I added a FAQ item on throttle body balancing with two links. The FAQ number is 22 and has two links, Part I and Part II. Watch these videos on how to balance your throttle bodies. It uses a water manometer, which is accurate and does differ slightly than the GM service manual in function, but it all works the same and you should achieve great results. You may have to do a simple mod on your throttle bodies if they have never been balanced before. Refer to the GM service manual on how to do that. I hope this helps a lot of people out with this simple procedure to throttle body perfection.

April 23, 2021

Added a few TPS test harnesses to the Shop today. Backordered parts are slowly trickling in. Keep watching the site for news.

April 20, 2021

Some TPS test harness parts are still on backorder. However, after talking with my supplier today, they are going to ship a partial order of parts today which hopefully will get me by until the rest of the backorder comes in. Watch the site for availability if you are waiting for this item. Also, still waiting for parts from the machinist for the fuel pressure tool and fuel pressure assemblies. This COVID stuff is killing the supply chain in a big way.

Also, made some minor text changes within the site.

April 13, 2021

Anyone outside the USA wanting an item, please use the CONTACT page and send me an email on what you want and I will send a PayPal invoice to you. This is the only way I send outside the country now.

April 12, 2021

Hope to have some fuel pressure adjust tools soon. I dropped the pieces off at the machinist today. Now it all depends on how long it takes to have things machined. Stay tuned for more info.

April 11, 2021

Added some 84 fuel pressure assemblies and a few more 82s. Still waiting for parts on everything else.

April 9, 2021

84 fuel pressure assemblies are SOLD OUT already. That was quick! More to come, maybe with any luck, more this weekend or first of next week.

April 8, 2021

Added more 82 fuel pressure assemblies and limited 84 assemblies. More to follow as back-ordered parts come in.

April 7, 2021

82 fuel pressure assemblies available in limited quantity, more on the way along with the 84 assemblies.

April 6, 2021

Had some parts come in for the 82 fuel pressure assembly’s, but only partial order. I will have a few available tomorrow, but limited quantity. More to come. As they say…”The early bird gets the worm”.

April 3, 2021

I have a lot of parts on order now to restock things on the site. Since COVID seems to slow things down, it may be a little wait. Keep checking back.

March 31, 2021

A TPS test harness was placed in Store and more to come soon, parts are on order. Fuel pressure assembly’s may be available this weekend in limited supply. Keep checking back if you are looking for something in particular.

March 23, 2021

Minor site changes made to clarify some items. Keep checking back on product availability.

March 17, 2021

A couple of updates to the site Shop. I have decided to deleted the IAC test harness from the Shop page as of today. A couple of items have sold out, 82/84 fuel pressure assemblies. I will try and resupply these items as soon as possible for anyone that is looking to purchase them. These are HOT items and they usually go quickly.

March 15, 2021

I have been getting some mail lately from several countries about orders for outside the United States. The website will not allow any country outside the Untied States to purchase anything. If you are outside the Untied States and wish to purchase something, send me an email from the contact page stating what you would like to purchase and I will after reviewing the request, I will send you a PayPal invoice payable on US dollars to your PayPal email. If you agree to all the terms, I will ship it.

I usually can get away with shipping everything in a “small USPS Priority mail” box to keep the shipping cost down, but it is going International USPS shipping, so no in stone shipping cost which is dependent on shipping weight as well. I hope this clears some things up for people outside the US. If not, send me mail. Thank you.

February 20, 2021

I have fuel pressure adjustment tools now in stock if you were waiting for that item.

February 8, 2021

Made some minor changes to the FAQ section and a few other back-end site corrections. Hoping to hear about fuel pressure adjustment tool parts backorder today.

February 7, 2021

I now have a limited quantity of 82 and 84 fuel pressure assemblies in stock. If you would like one, now is the time to purchase them. Hoping to have some fuel pressure adjustment tools thins week, keep watching.

February 6, 2021

Hello all. Not a lot going on here, still waiting on parts to arrive to get things done and make items available to everyone. Hoping that I will get some parts soon. Sorry if anyone is waiting for something in particular, but COVID is crimping my style and availability. Keep coming back and having a look to see what’s going on. Thank you and be safe out there.

January 22, 2021

I plan on having some 82 and 83 fuel pressure assemblies available either late this weekend or early next week. Watch the site for those items. Also, may have some more fuel pressure tools available next week. UPDATE: I added a Search feature at the top of the Blog, but it is tied to the entire site, not just the Blog. I hope it helps if you are searching for something in particular. If you find it useful or not so much, drop me some feedback from the Contact page. Thank you.

January 14, 2021

Added an announcement bar with an auto link at the top of the Home page to the relevant page. This is to post important topics, sales or items that may be of interest if you didn’t look here first in the Blog. I hope it helps your shopping experience. Enjoy!

January 11, 2021

82 fuel pressure assemblies are now available again in limited quantity. Also the TPS test harnesses are available in limited quantity. I may have some 84 FPAs later this week.

January 9, 2021

Made more internal back-end changes to the site. Also, I should have some 82 corvette fuel pressure assemblies next week sometime. Watch the Blog and Shop for availability.

January 5, 2021

Minor text changes to the site. Working on getting more 82 and 84 fuel pressure assemblies and more tools. Could possibly have some items available by this weekend. Keep stopping by and check if interested.

January 1, 2021

Hope everybody had a great New Year’s Eve and welcome to 2021. I can only hope that this year is MUCH better than 2020 which was a disaster due to COVID. Keep watching the Blog for updates to the supply item availability here.